|
Contact Information
Telephone
+32
(0)3 722 91 60
Fax
+32
(0)3 722 91 66
Postal
address
Zakstraat
104
9112
Sinaai
Belgium
Electronic
mail
info@proxtech.com
|
| |
|
|
A set
of complete reader PCB's to allow you to create without any problems
your own reader hardware. You just need to mount the completed reader
pcb into a housing of a standard or your own design and you've done the
job.
These reader PCB's
can be offered for 125 kHz EM4x02 or Hitag technology as well as for
13.56 MHz Mifare or Legic Prime or Legic Advant technology.
|
|
|
The
Mullion reader PCB Board is a universal base plate for integration of
our fully potted OEM modules. ( Please click here
for further details on these modules. )
This PCB offers a very easy and cost-effective solution to create a
mullion reader hardware, which can be mounted inside readily available
reader housings of into housings of your own design. |
Technical specifications Mullion reader
PCB
- Dimensions: 93 x 40 mm
- To
be completed with one of the OEM modules( Click here
for further details on these modules ). Modules are available
for EM4x02, Hitag, Mifare or Legic technology
- Interface: to be specified when ordering
- Wiegand D0/D1 (TTL levels) (several
bitblock lengths available)
- Clock & Data (TTL levels) (several
number of characters available)
- RS232 (9600,
4800 or 2400 Bd) Asynchronous serial (RxD, TxD)
- TTL (9600,
4800 or 2400 Bd) Asynchronous serial (RxD, TxD)
- RS485 Asynchronous
serial (RxD, TxD)
- customer
specific interfaces available on request
- Read range :
depends on type of module placed on the board. Refer to modules for
further details.
- Power supply
: 9...24V DC
- Address selection for RS485 versions : 4 pole
DIP-switch for up to 16 addresses
- Indications : 2 LED's ( red /green ) +
buzzer
- Operating
temperature : -20 °C to + 60 °C
|
|
The
wall-mount reader PCB is developed for easy integration into a wide
variety of standard or own-design housings.
This PCB is
available for 125 kHz EM4x02 or Hitag technology as well as for 13.56
MHz Mifare or Legic technology.
The PCB is
available with different output interfaces and can be fitted into a
standard ( incl. Siedle ) or customer-designed housing. |
Technical specifications Wall-mount
reader PCB
- Dimensions: 76x76
mm
- Interface: to be specified when ordering
- Wiegand D0/D1 (TTL levels) (several
bitblock lengths available)
- Clock & Data (TTL levels) (several
number of characters available)
- RS232 (9600,
4800 or 2400 Bd) Asynchronous serial (RxD, TxD)
- TTL (9600,
4800 or 2400 Bd) Asynchronous serial (RxD, TxD)
- RS485 Asynchronous serial
(RxD, TxD)
- customer
specific interfaces available on request
- Read range with
internal antenna (values depending on transponder types, power supply and ambient
environment)
- on 125
kHz up to 150 mm
- on 13,56
MHz up to 80 mm
- Power supply
: 5 Vdc or 9 ... 24 Vdc
- Address selection for RS485 versions : 4 pole
DIP-switch for up to 16 addresses
- Duplicate read control
- Indications : 3 LED's ( red / yellow / green ) +
buzzer
- Wiring : screw connector block
- Operating
temperature : -20 °C to + 60 °C
- Integrated
antenna and electronics
- Pre-designed
with necessary outputs for optional external keypad
- Optional :
this reader can be completed with an optional relay and/or digital
inputs to create a remote access terminal with RS485 interface
|
