|
 
Contact Information
Telephone
+32
(0)3 722 91 60
Fax
+32
(0)3 722 91 66
Postal
address
Zakstraat
104
9112
Sinaai
Belgium
Electronic
mail
info@proxtech.com
|
| |
|
![[Product Image]](../images/Premium.jpg)
|
The
PREMIUM offers a combination of modern design with high specs and
versatility. The PREMIUM reader is available in 3 versions :
-
PREMIUM-EM
: a 125 kHz reader, supporting transponder types EM4x02, Hitag 2 in
Public Mode A, TEMIC e5550 and equivalent devices.
-
PREMIUM-MF
: a 13,56 MHZ Mifare UID reader supporting Mifare, Mifare Ultralight
and Mifare Desfire
-
PREMIUM-MFS
: a 13,56 MHz Mifare Sector reader allowing full access to all
sectors on the Mifare transponder.
The
user can freely select between 13 interfaces, which can be set by an
integrated DIP-switch, or for the Mifare Sector reader, the reader
interface can be freely set by the Master Card.
Due
to the fully potted housing, the reader can be installed both indoors
and outdoors.
A
three-colour LED indication and audible tone enhance user feedback. Both
beeper and LED’s can be controlled by the host system.
Refer to separate
web page for further details on Premium-MFS sector reader ( click button
on left side ). |
Technical specifications PREMIUM-EM
& PREMIUM-MF
- Dimensions: 89 x 45 x 16 mm, optional spacer plate 89
x 45 x 7 mm ( supplied with each reader )
- Supported
transponder types
- on 125
kHz : 40 bit read only transponders (EM4x02 family, HiTag2 Public
Mode A,TEMIC e5550 and equivalent)
- on 13,56
MHz : mifare® Std, mifare® Ultralight, mifare® DESFire (Contactless
interface as per spec ISO/IEC 14443 Type A)
- Interface: DIP-switch selectable ( or selectable with
Master Card for PREMIUM-MFS )
- Wiegand (42
bits, 34 bits or 26 bits)
- Clock & Data (13,
10, 9 or 8 characters)
- RS232 (9600,
4800 or 2400 Bd)
- TTL (9600,
4800 or 2400 Bd)
- RS485
(requires special version of the reader - only available for
PREMIUM-EM)
- customer
specific interfaces available on request
- Read range with
internal antenna ( values depending on transponder types, power supply
and ambient
environment )
- on 125
kHz up to 175 mm
- on 13,56
MHz up to 60 mm
- Power supply
: 5 Vdc to 13,8 Vdc / 100 mA typ.
- Indications : 3 LED's ( red / yellow / green ) +
buzzer
- Wiring : 10-wire cable ( approx. 1 m long )
- Protection
rate : IP65 ( depending on mounting method )
- Operating
temperature : -20 °C to + 60 °C
- Integrated
antenna and electronics
- Fully potted
housing allows easy installation both in- as outdoor
|
