Home Up Feedback Contents Information

PL1000
PL500 PL1000 PL3000

 

 

 

 

 

 

 

Contact Information

Telephone

+32 (0)3 722 91 60

Fax

+32 (0)3 722 91 66

Postal address

Zakstraat 104

9112 Sinaai

Belgium

Electronic mail

info@proxtech.com

 

 

The PL1000 is a 1-door access control system with reliable techniques . It combines all the electronics needed for a basic access control system into a single robust plastic housing allowing for simple installation : user memory for up to 500 users, integrated RFID reader and antenna, keypad, a relay to drive the door opener and 3 LEDs and a buzzer for status indications. The minimum connection only requires AC or DC power and a door strike. Programming is done by using a master card and the integrated keypad.

The built-in reader and keypad allow for 'card only', 'code only' or 'card + code' control.

Due to the fully potted housing, the reader can be installed both indoors and outdoors. An extra optional mounting frame is supplied with each reader to facilitate installation even further or to allow installation on metal surfaces.

PL1000 is available in a black or white housing.

Applications for this system : control of offices, computer rooms, storage rooms, private residences, etc.

Technical specifications PL1000

  • Dimensions: 80 mm x 80 mm x 18 mm (excl. mounting frame). Optional frame size 80 x 80 x 20 mm
  • Supported transponder types :
    • on 125 kHz : 40 bit read only transponders (EM4x02 family, HiTag2 Public Mode A,TEMIC e5550 and equivalent)
    • on 13,56 MHz : Mifare
  • User memory for up to 500 users  
  • Integrated keypad for programming and 'card only' / 'code only' / 'card + code' verification
  • Power supply : 9 - 15  Vac/dc
  • 1 relay output ( NO ) : max. rating 1A / 24V
  • Read range with internal antenna ( values depending on transponder types, power supply and ambient environment )
    • on 125 kHz up to 100 mm
    • on 13,56 MHz up to 80 mm 
  • Adding and deleting tags is done by simple use of a Master Tag and integrated keypad

  • Indications : 3 LED's ( red / yellow / green ) + buzzer

  • Protection rate : IP65 ( depending on mounting method )
  • Fully potted housing allows easy installation both in- as outdoor
  • Each user card or key fob has its unique identification number
  • Available in black or white housing
 
Send mail to info@proxtech.com with questions or comments about this web site.
Copyright © 2007 ProxTech International bvba