|
Contact Information
Telephone
+32
(0)3 722 91 60
Fax
+32
(0)3 722 91 66
Postal
address
Zakstraat
104
9112
Sinaai
Belgium
Electronic
mail
info@proxtech.com
|
| |
|
|
The
MULTITOP/PCB-xx desktop PCB board is a cost-effective solution to create very easily your own
desktop or integrated reader for all your smart card applications. Available
for 125 kHz ( EM4102, Hitag 1, Hitag 2, Hitag S, ...) and
13,56 MHz ( Mifare, Legic (Prime, Advant), Multi-ISO (ISO14443A,
ISO14443B, ISO15693) and NFC),
these boards are
ideally suited for a wide variety of applications, particularly access
control, time clock and POS system.
The
MULTITOP/PCB-xx desktop PCB boards
are available with either a USB or serial (TTL, RS232 or RS485)
interface.
The
MULTITOP/PCB-xx desktop PCB board
can be set in either HID mode ( keyboard emulation, no need for
extra drivers, simply connect to the PC ) or as virtual COM-port
offering full access to the transponder.
All
versions have exactly the same dimensions and connections. So you need
to implement this board only once into your hardware and you can
interchange immediately between all available technologies. |
Technical specifications
MULTITOP/PCB-xx desktop PCB board
- Dimensions: 80 x 56 x 10 mm
- Interface: USB, TTL, RS232 or RS485 (to be specified when
ordering)
- Power supply : 5V DC ± 10% via USB or communication cable
- Read range with
internal antenna ( values depending on transponder types, power supply and
ambient environment ) : up to 10 cm
- Indications : 2 LED's ( red / green ) + buzzer
- Operating
temperature : - 25°C to + 80°C
- Available in following versions :
- 125 kHz EM4102
-
125 kHz Hitag 1, Hitag 2, Hitag S
- 13,56 MHz Mifare (1K, 4K)
- 13,56 MHz Legic (Prime, Advant)
- 13,56 MHz
Multi-ISO (ISO14443A, ISO14443B, ISO15693)
- 13.56 MHz NFC
- Operating systems
supported when in virtual COM-port mode :
-
Windows 98, 98SE, ME, 2000, Server 2003, XP and Server 2008
- Windows 7 32-bit, 64-bit
- Windows Vista and
Vista
64-bit
- Windows XP Embedded
- Windows CE 4.2, 5.0 and 6.0
- Mac OS 8/9, OS-X
- Linux 2.4 and higher
- Options :
- with integrated relay 5V 3A
- connection for a 4 x 4 Matrix keypad
- customer-specific cable connection via soldering pads
on pcb
|
