Home Up Feedback Contents Information

Mini & Mini/K
Premium Pass Mini & Mini/K MCR & MCR/K Nova Desktop

 

 

Installation

 

 

 

 

 

Contact Information

Telephone

+32 (0)3 722 91 60

Fax

+32 (0)3 722 91 66

Postal address

Zakstraat 104

9112 Sinaai

Belgium

Electronic mail

info@proxtech.com

 

 

The ProxLine MINI card reader is a real standard and a classic in the domain of RFID card readers. It has proven its reliability for many years and in many installations all over the world. Available in both 125 kHz as well as in 13,56 MHz versions with a lot of available data interfaces, this reader type can be used in practically all application domains, such as access control systems, time & attendance, production management, ... .

Available versions :

  • MINI-EM : a 125 KHz reader for EM4x02 transponders

  • MINI/K-EM : same as above, but with integrated keypad  

  • MINI-HT : a 125 KHz reader for Hitag transponders

  • MINI/K-HT : same as above, but with integrated keypad

  • MINI-MF : a 13,56 MHz reader for Mifare transponders

  • MINI/K-MF : same as above, but with integrated keypad  

  • MINI-LG : a 13,56 MHz reader for Legic transponders

  • MINI/K-LG : same as above, but with integrated keypad

All these reader types can be supplied with a wide selection of different data interfaces, such as various Wiegand or Clock&Data outputs, but also RS232, RS485 or customer specific interfaces.

 

Technical specifications MINI & MINI/K

  • Dimensions: 135 x 49 x 20 mm
  • Interface: to be specified when ordering
    • Wiegand (several bitblock lengths available)
    • Clock & Data (several number of characters available)
    • RS232 (9600, 4800 or 2400 Bd)
    • TTL (9600, 4800 or 2400 Bd) 
    • RS485 
    • customer specific interfaces available on request
  • Read range with internal antenna ( values depending on transponder types, power supply and ambient environment )
    • on 125 kHz up to 200 mm
    • on 13,56 MHz up to 80 mm 
  • Power supply : 5 Vdc or 12Vdc
  • Duplicate read control
  • Indications : 2 LED's ( red /green ) + buzzer
  • Wiring : 8-wire cable ( approx. 1 m long ) or with screw connector block
  • Protection rate : IP65 ( depending on mounting method )
  • Operating temperature : -20 °C to + 60 °C
  • Integrated antenna and electronics
  • Fully potted housing allows easy installation both in- as outdoor
  • Integrated keypad for MINI/K version
 
Send mail to info@proxtech.com with questions or comments about this web site.
Copyright © 2007 ProxTech International bvba