|
Contact Information
Telephone
+32
(0)3 722 91 60
Fax
+32
(0)3 722 91 66
Postal
address
Zakstraat
104
9112
Sinaai
Belgium
Electronic
mail
info@proxtech.com
|
| |
 |
The
ProxLine MCR card reader is ProxTech's most versatile wall mount reader.
Also available in both 125 kHz as well as in 13,56 MHz versions with a
lot of available data interfaces, this reader has shown to be the ideal
solution for mid range reading in applications where wall mounting is
required. An extra mounting frame makes it very easy to mount this
reader when the signal cable is placed on top of the wall; you can just
feed it through the mounting frame.
Available versions
:
-
MCR-EM
: a 125 KHz reader for EM4x02 transponders
-
MCR/K-EM
: same as above, but with integrated keypad
-
MCR-HT
: a 125 KHz reader for Hitag transponders
-
MCR/K-HT
: same as above, but with integrated keypad
-
MCR-MF
: a 13,56 MHz reader for Mifare transponders
-
MCR/K-MF
: same as above, but with integrated keypad
-
MCR-LG
: a 13,56 MHz reader for Legic transponders
-
MCR/K-LG
: same as above, but with integrated keypad
All
these reader types can be supplied with a wide selection of different
data interfaces, such as various Wiegand or Clock&Data outputs, but
also RS232, RS485 or customer specific interfaces.
|
Technical specifications MCR &
MCR/K
- Dimensions: 80 x 80 x 18 mm (An optional mounting
support ( 20mm ) is added to each reader.)
- Interface: to be specified when ordering
- Wiegand (several
bitblock lengths available)
- Clock & Data (several
number of characters available)
- RS232 (9600,
4800 or 2400 Bd)
- TTL (9600,
4800 or 2400 Bd)
- RS485
- customer
specific interfaces available on request
- Read range with
internal antenna (values depending on transponder types, power supply and ambient
environment)
- on 125
kHz up to 150 mm
- on 13,56
MHz up to 80 mm
- Power supply
: 5 Vdc or 9 ... 24 Vdc
- Duplicate
read control
- Indications : 3 LED's ( red / yellow / green ) +
buzzer
- Wiring : screw connector block
- Protection
rate : IP65 ( depending on mounting method )
- Operating
temperature : -20 °C to + 60 °C
- Integrated
antenna and electronics
- Fully potted
housing allows easy installation both in- as outdoor
- Integrated
keypad for MCR/K version
- Available in
black or white housing
- Optional :
this reader can be completed with an optional relay and/or digital
inputs to create a remote access terminal with RS485 interface
|
