|
Contact Information
Telephone
+32
(0)3 722 91 60
Fax
+32
(0)3 722 91 66
Postal
address
Zakstraat
104
9112
Sinaai
Belgium
Electronic
mail
info@proxtech.com
|
| |
|
|
The
DESK/PCB-xx desktop PCB board is a cost-effective solution to create very easily your own
desktop or integrated reader for all your smart card applications. Available
for 125 kHz EM4102, Hitag 1, Hitag 2, Hitag S, EM4150, Temic
T5567, Q5 and 13,56 MHz Mifare (1K, 4K, Desfire, Ultralight), Legic
(Prime, Advant), Multi-ISO (ISO14443A, ISO14443B, ISO15693) as well as
HID PROX or HID iCLASS technologies, and
equipped with an USB and a RS232 data interface, these boards are
ideally suited for a wide variety of applications, particularly access
control, time clock and POS system.
The
DESK/PCB-xx desktop PCB offers either of 2 operating modes : as keyboard
emulation (without the need for specific drivers, just plug into the
computer system) or as a virtual COM-port offering full access to the
transponder. All
versions have exactly the same dimensions and connections. So you need
to implement this board only once into your hardware and you can
interchange immediately between all available technologies. |
Technical specifications
DESK/PCB-xx desktop PCB
- Dimensions: 76 x 49 x 14 mm
- Interface: USB or RS232 (to be specified when ordering)
- Power supply : 5V DC ± 10% via USB or communication cable
- Read range with
internal antenna ( values depending on transponder types, power supply and
ambient environment ) : up to 10 cm
- Indications : 2 LED's ( red / green ) + buzzer
- Operating
temperature : - 10 °C to + 50 °C
- Identical
dimensions and connections for all pcb-versions; one-time implementation of
the board means immediate interchangeability between all technologies
- Available in following versions :
- 125 kHz EM4102, Hitag 1, Hitag 2, Hitag S, EM4150,
Temic T5567, Q5
- 125 kHz HID PROX
- 13,56 MHz Mifare (1K, 4K, Desfire, Ultralight)
- 13,56 MHz Legic (Prime, Advant)
- 13,56 HID iClass
- 13,56 MHz
Multi-ISO (ISO14443A, ISO14443B, ISO15693)
|
