MCR & MCR/K

The ProxLine® MCR and MCR/K are contactless Read-Only or Read/Write devices for both surface and flush mount

 

MCR   

MCR  MCR

Technical specifications MCR :

  • Dimensions: 80 x 80 x 18 mm

  • Interface: Wiegand, Clock/Data, RS232 and TTL or customer specific

  • Read/Write range 

    • on 125 kHz up to 15 cm, 

    • on 13,56 MHz up to 8 cm 

    • depending on transponder type and ambient environment

  • Power supply: 5V DC or 9...24V AC/DC

  • Duplicate read control

  • Temperature range: -20°C to + 60°C

  • Protection rate: IP 65 (depending on mounting )

  • Integrated antenna and electronics

  • With integrated buzzer and 3 Leds for status indication

  • Easy to install both surface or flush mounting

  • A mounting support ( 20mm ) is added to each reader
  • Fully potted housing allows easy mounting indoors and outdoors
MCR/K    MCR/K  MCR/K

Technical specifications MCR/K :

  • Dimensions: 80 x 80 x 18 mm

  • Interface: Wiegand, Clock/Data, RS232 and TTL or customer specific

  • Read/Write range on 125 kHz up to 15 cm, on 13,56 MHz up to 8 cm depending on transponder type and ambient environment

  • Power supply: 5V DC or 9...24V AC/DC

  • Duplicate read control

  • Temperature range: -20°C to + 60°C

  • Protection rate: IP 65 (depending on mounting )

  • Integrated antenna and electronics

  • With integrated buzzer and 3 Leds for status indication

  • Easy to install both surface or flush mounting

  • A mounting support ( 20mm ) is added to each reader
  • Fully potted housing allows easy mounting indoors and outdoors
  • With integrated keypad
                    
The cards and keyfobs for this reader type :

Mifare®   Legic®   HITAG™ 1   HITAG™ 2

Read-Only  

 

 

Click here to see the other reader and housing types.