Transponders, keyfobs and ISO cards

The contactless  ProxLine® Legic® devices function in the frequency range of 13,56 MHz.

The keyfob is available in the standard colours BLACK and BLUE.

Coding specifications

An important part of the data array is the so called authorisation code. This code is a special data stored in the Read/Write unit which is compared with a specific part of the data array, the data protection code, in the card memory. Only when these data correspond, the card can be read and written to. When there is no protection code on the card, this card may be read and written to from all Read/Write units. The authorisation code array is read into the Read/Write unit with a special authorisation card. Each Read/Write card can contain up to 16 authorisation code arrays. Each individual authorisation code array can be removed again from the Read/Write unit with an authorisation erase card.

(only HiCo version = 4000 Oe), or an additional contact memory/microprocessor chip to create hybrid cards.

Technical specifications

• Material: 
  • Keyfob : polycarbonate
  • ISO-card : PVC 
• Dimensions: see figure above ( ISO card : ISO 10536 (85,5 x 54 x ca. 0,84mm) (Standard version))
• Chip type: LEGIC® - Chip MIM 256-ASIC
• Memory capacity: 256 Byte
• Characters: 512
• Operating frequency: ca. 13,56MHz
• Read/Write distance: 8 cm (read range depends on antenna used)