HITAG™ 2

Transponders, keyfobs and ISO cards

The contactless  ProxLine® HITAG™ 2 devices function in the frequency range of 125 kHz.

 

 SchlüsselanhängerAbmessungen Karte

                         HITAG™ 2 keyfob

                                 HITAG™ 2 ISO card

HITAG™ 2 keyfob

This version is available in the standard colours BLACK and BLUE.

Technical specifications

  • Material: polycarbonate

  • Dimensions : see figure

  • Operating frequency: 125 kHz – 131kHz

  • Chip type: passive (no battery)

  • Read/write distance: reader dependant up to 30cm

  • Coding: Manchester / Biphase

  • Memory type: E²PROM (Read/Write)

  • Memory size: 256 bits

  • Modulation: AM

  • Transmission rate: 2/4 kBd (mode dependant)

  • Data storage: 10 years (on ambient temperature of +55°C)

  • Write cycli: 100.000

  • Memory functions:

    1. 32-bit serial number

    2. free user-configurable data

    3. Security function (Encryption)

  • Activation modes:

    1. Read/Write or

    2. Write protected or

    3. Read/Write protected

  • Security modes:

    1. Encryption mode

    2. Password mode

  • Anti-collision protection: available

 

HITAG™ 2 card

Technical specifications

  • Material: PVC

  • Dimensions : ISO 10536 (85,5 x 54 x 0,84 mm)

  • Operating frequency: 125 kHz – 131kHz

  • Chip type: passive (no battery)

  • Read/write distance: reader dependant up to 30cm

  • Coding: Manchester / Biphase

  • Memory type: E²PROM (Read/Write)

  • Memory size: 1024 bits

  • Modulation: AM

  • Transmission rate: 2/4 kBd (mode dependant)

  • Data storage: 10 years (on ambient temperature of +55°C)

  • Write cycli: 100.000

  • Memory functions:

    1. 32-bit serial number

    2. free user-configurable data

    3. Security function (Encryption)

  • Activation modes:

    1. Read/Write or

    2. Write protected or

    3. Read/Write protected

  • Security modes:

    1. Encryption mode

    2. Password mode

  • Anti-collision protection: available

Design / printing

The card allows printing on both the front and the rear side in mono- or polychrome.

Refinement

Personalisation (text, drawings and/or photo) is possible by digital printing with appropriate card printers.

The ISO card can be combined with other coding types, such as e.g. bar code and magnetic stripe

(only HiCo version = 4000 Oe), or an additional contact memory/microprocessor chip to create hybrid cards.

 

The other transponder technologies :           The readers :
Mifare®    Legic®    Read-Only    HITAG™ 1   

Mifare®    Legic®    HITAG™ 1    HITAG™ 2

Read-Only