PREMIUM

The PREMIUM offers a combination of desgn with high specs and versatility. The PREMIUM reader is available in 3 versions :

  • Premium-EM : on 125 KHz, supporting transponder types EM4x02, Hitag 2 in Public Mode A, TEMIC e5550 and equivalent devices. 

  • PREMIUM-MF : a 13,56 MHZ Mifare UID reader supporting Mifare, Mifare Ultralight and Mifare Desfire

  • PREMIUM-MFS : a 13,56 MHz Mifare Sector reader allowing full access to all sectors on the Mifare transponder.

The user can freely select between 13 interfaces, which can be set by an integrated DIP-switch, of for the Mifare Sector reader, the reader interface can be freely set by the Master Card. 

Due to the fully potted housing, the reader can be installed both indoors and outdoors.

A three-colour LED indication and audible tone enhance user feedback. Both beeper and LED’s can be controlled by the host system.

 

 

 

 

  Technical specifications PREMIUM :

  • Dimensions: 89 x 45 x 16 mm, optional spacer plate 89 x 45 x 7 mm ( supplied with each reader )

  • Interface: DIP-switch selectable or selectable with Master Card ( for PREMIUM-MFS ): Wiegand, Clock/Data, RS232 and TTL or customer specific ( various selections possible )

  • Read range with internal antenna

    • on 125 kHz up to 160 mm, 

    • on 13,56 MHz up to 80 0m 

    • depending on transponder type and ambient environment

  • Power supply: 5 to 13,6 Vdc

  • Power consumption : 100 mA typ. 

  • Wiring : 10-wire cable ( approx. 1 m long )

  • Temperature range: -20°C to + 60°C

  • Protection rate: IP 65 (depending on mounting )

  • Integrated antenna and electronics

  • With integrated buzzer and 3 Leds for status indication

  • Easy to install in both mullion or wall mounting

  • Fully potted housing allows easy mounting indoors and outdoors

 

  
                    
The cards and keyfobs for this reader type :

Mifare®   Read-Only  

 

 

Click here to see the other reader and housing types.